document number: 93538 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 11-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast rectifier, 30 a fred pt ? vs-etu3006-m3, vs-ETU3006FP-M3 vishay semiconductors features ? low forward voltage drop ? ultrafast soft recovery time ? 175 c operating junction temperature ? low leakage current ? fully isolated package (v ins = 2500 v rms ) ? true 2 pin package ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition ? designed and qualified ac cording to jedec-jesd47 description ultralow v f , soft-switching ultrafast rectifiers optimized for discontinuous (critical) mode (dcm) power factor correction (pfc). the minimized conduction lo ss, optimized stored charge and low recovery current minimized the switching losses and reduce over dissipation in the switching element and snubbers. the device is also intended for use as a freewheeling diode in power supplies and other power switching applications. applications ac/dc smps 70 w to 400 w e.g. laptop and printer ac adaptors, desktop pc, tv and monitor, games units and dvd ac/dc power supplies. product summary package 2l to-220ac, 2l to-220fp i f(av) 30 a v r 600 v v f at i f 2 v t rr (typ.) 30 ns t j max. 175 c diode variation single die 2l to-220ac 2l to-220 full-pak ba s e cathode 2 3 anode 1 cathode 2 anode 1 cathode v s -etu 3 006-m 3 v s -etu 3 006fp-m 3 absolute maximum ratings parameter symbol test conditions values units peak repetitive reverse voltage v rrm 600 v average rectified forward current in dc i f(av) t c = 130 c 30 a full-pak t c = 72 c non-repetitive peak surge current i fsm t j = 25 c 200 operating junction and storage temperatures t j , t stg - 65 to 175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditio ns min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 100 a 600 - - v forward voltage v f i f = 30 a - 1.4 2.0 i f = 30 a, t j = 150 c - 1.15 1.35 reverse leakage current i r v r = v r rated - 0.02 30 a t j = 150 c, v r = v r rated - 30 250 junction capacitance c t v r = 600 v - 20 - pf series inductance l s measured lead to lead 5 mm from package body - 8 - nh
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93538 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 11-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-etu3006-m3, vs-ETU3006FP-M3 vishay semiconductors ultrafast rectifier, 30 a fred pt ? dynamic recovery characteristics (t j = 25 c unless otherwise specified) parameter symbol test conditi ons min. typ. max. units reverse recovery time t rr i f = 1 a, di f /dt = 50 a/s, v r = 30 v - 30 45 ns t j = 25 c i f = 30 a di f /dt = 200 a/s v r = 200 v -45- t j = 125 c - 100 - peak recovery current i rrm t j = 25 c - 5.6 - a t j = 125 c - 10 - reverse recovery charge q rr t j = 25 c - 127 - nc t j = 125 c - 580 - thermal - mechanical specifications parameter symbol test conditions min. typ. max. units maximum junction and storage temperature range t j , t stg - 65 - 175 c thermal resistance, junction to case r thjc - 0.84 1.3 c/w full-pak - 3.2 3.8 thermal resistance, junction to ambient r thja typical socket mount - - 70 typical thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased -0.5- weight -2-g -0.07- oz. mounting torque 6 (5) - 12 (10) kgf cm (lbf in) marking device case style 2l to-220ac etu3006 case style 2l to-220 full-pak etu3006fp
vs-etu3006-m3, vs-ETU3006FP-M3 ultrafast rectifier, 30 a fred pt ? vishay semiconductors document number: 93538 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 11-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics forward voltage drop - v f (v) instantaneous forward current - i f (a) 0.0 0.5 1.0 1.5 2.0 2.5 1 10 100 1000 tj = 25c tj = 150c tj = 175c 0 100 200 300 400 500 600 0.001 0.01 0.1 1 10 100 1000 150c 175c 25c 50c 75c 125c 100c reverse current - i r (a) reverse voltage - v r (v) reverse voltage - v r (v) junction capacitance - c t (pf) 0 100 200 300 400 500 600 1 10 100 1000 t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 d = 0.01
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93538 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 11-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-etu3006-m3, vs-ETU3006FP-M3 vishay semiconductors ultrafast rectifier, 30 a fred pt ? fig. 5 - maximum thermal impedance z thjc characteristics (full-pak) fig. 6 - maximum allowable case temperature vs. average forward current fig. 7 - maximum allowable case temperature vs. average forward current (full-pak) fig. 8 - forward power loss characteristics t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 1e+01 1e+02 0.1 1 10 single pulse (thermal resistance) d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 d = 0.01 average forward current - i f (av) (a) allowable case temperature (c) 0 5 10 15 20 25 30 35 120 130 140 150 160 170 180 dc average forward current - i f (av) (a) allowable case temperature (c) 0 5 10 15 20 25 30 35 20 40 60 80 100 120 140 160 180 dc average forward current - i f (av) (a) average power loss ( watts ) 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 d = 0.01 d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 dc rms limit
vs-etu3006-m3, vs-ETU3006FP-M3 ultrafast rectifier, 30 a fred pt ? vishay semiconductors document number: 93538 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 11-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - typical re verse recovery vs. di f /dt fig. 10 - typical stored charge vs. di f /dt fig. 11 - reverse recovery parameter test circuit fig. 12 - reverse recovery waveform and definitions trr ( ns ) di f /dt (a/s ) 100 1000 10 20 30 40 50 60 70 80 90 100 110 120 130 if = 30 a, 125c if = 30 a, 25c typical value qrr ( nc ) di f /dt (a/s ) 100 1000 0 200 400 600 800 1000 1200 1400 1600 1800 if = 30 a, 125c if = 30 a, 25c typical value irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93538 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 11-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-etu3006-m3, vs-ETU3006FP-M3 vishay semiconductors ultrafast rectifier, 30 a fred pt ? ordering information table ordering information (example) preferred p/n quantity per tube minimum order quantity packaging description vs-etu3006-m3 50 1000 antistatic plastic tube vs-ETU3006FP-M3 50 1000 ant istatic plastic tube links to related documents dimensions 2l to-220ac www.vishay.com/doc?95259 2l to-220 full-pak www.vishay.com/doc?95260 part marking information 2l to-220ac www.vishay.com/doc?95391 2l to-220 full-pak www.vishay.com/doc?95392 3 - t = to-220 4 - u = hyperfast recovery time 5 - current code: 30 = 30 a 6 - voltage code: 06 = 600 v 7 - fp = full-pak none = to-220 e = single diode 2 - circuit configuration: 1 - vishay semiconductors product - environmental digit: -m3 = halogen-free, rohs compliant and terminations lead (pb)-free 8 device code 5 1 3 2 4 6 7 8 vs- e t u 30 06 fp -m3
document number: 95259 for technical questi ons concerning discrete products, contact: diodestech@vishay.com www.vishay.com revision: 21-jan-10 for technical questi ons concerning modul e products, contact: indmodules@vishay.com 1 true 2 pin to-220 outline dimensions vishay high power products dimensions in millimeters and inches notes (1) lead dimension and fini sh uncontrolled in l 1 ? these dimensions are within a llowable dimens ions of jedec to-220ab rev. j outline dated 3-24-87 ? controling dimension: inch e a f te r m . 4 e d l 0.150" ref. 0.002" 0.05 mm h 1 ? p q b 1 l 1 b j 1 c 12 ? 2.0 mm ref. 60 45 b a symbol millimeters inches min. max. min. max. a 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 14.99 15.49 0.590 0.610 e 10.04 10.41 0.395 0.410 e 5.08 bsc 0.200 bsc f 1.22 1.37 0.048 0.054 h 1 5.97 6.47 0.235 0.255 j 1 2.54 2.79 0.100 0.110 l 13.47 13.97 0.530 0.550 l 1 (1) 3.31 3.81 0.130 0.150 ? p 3.79 3.88 0.149 0.153 q 2.60 2.84 0.102 0.112
document number: 95260 for technical questi ons concerning discrete products, contact: diodestech@vishay.com www.vishay.com revision: 22-jan-10 for technical questi ons concerning modul e products, contact: indmodules@vishay.com 1 true 2 pin to-220 full-pak outline dimensions vishay high power products dimensions in millimeters and inches ? q e a f e l h 1 c j 1 b d l 1 q 2 q 1 b 1 symbol millimeters inches min. max. min. max. a 4.53 4.93 0.178 0.194 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 15.67 16.07 0.617 0.633 e 9.96 10.36 0.392 0.408 e 5.08 typical 0.200 typical f 2.34 2.74 0.092 0.107 h 1 6.50 6.90 0.256 0.272 j 1 2.56 2.96 0.101 0.117 l 12.78 13.18 0.503 0.519 l 1 2.23 2.63 0.088 0.104 ? q 2.98 3.38 0.117 0.133 q 1 3.10 3.50 0.122 0.138 q 2 14.80 15.20 0.583 0.598 0 5 0 5
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
